ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - zonearmor.com
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 2
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 3
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 4
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 5
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 6
ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving - Image 7

ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving

  • 🛡️ ANSI A5 Extreme Cut Protection: Engineered with high-performance HPPE composite yarns, these safety gloves offer Level 5/A5 cut resistance. Established to protect hands from razor-sharp glass sheets, utility blades, and stamped metal burrs without the bulk of traditional leather.

  • 🦎 Wet & Oily Sand-Dip Grip: The full sandy nitrile palm coating acts like a suction cup in fuel and lubricant environments. Unlike smooth rubber, this “micro-suction” texture locks onto oily glass panes, wet lumber, and slippery metal tubes, dramatically reducing grip failures.

  • 💧 Waterproof & Chemical Defense Barrier: The 100% nitrile double-dip process seals the palm and fingers completely liquid-proof. This stops cutting oils, industrial coolants, and mild solvents from penetrating the glove, preventing maceration (skin softening) and contact dermatitis during prolonged wet work.

  • 🧤 Breathable “Second Skin” Flexibility: Handle small screws, splinters, and fine wires with ease. 15-gauge fine knitting provides precision dexterity, while the uncoated back allows continuous airflow—eliminating that clammy hand fatigue common with cheap fully-coated leather rigs.

  • 🏭 Anti-Static & Multi-Hazard Ready: Inherently anti-static properties dissipate electrostatic build-up, safeguarding sensitive glass/metal assembly lines. The ideal heavy-duty PPE for glass plants, stamping facilities, sharp wood carving, and structural framing where cut risks and oily tools coexist.

Category:

When Sharp Materials Meet Slippery Surfaces, Trust Level 5.

Working in a glass factory or a high-volume woodworking shop presents a dual threat: extreme sharpness and slick lubricants. Standard cut-resistant gloves leave workers exposed to oil penetration, while cheap PVC dots crumble on contact with sharp edges. Our ANSI A5 Cut-Resistant Sandy Nitrile Gloves are the definitive answer for professionals navigating deadly edges in greasy conditions.

Uncompromising Cut Protection, Engineered Grip
We utilize a ultra-durable HPPE (High-Performance Polyethylene) blended shell that clocks in at Cut Resistance Level 5 (ANSI/ISEA). This pure mechanical protection stops slashing injuries from glass corners, carving knives, and abrasive metal slag. The secret weapon? The Nitrile Sandy Dip finish. It’s scientifically rougher than micro-foam, specifically designed to displace oil and water on contact, ensuring your glass or wood piece stays locked in your palm, not on the floor.

Premium Coating That Won’t Degrade
Why do cheap gloves fail? The coating peels. Our double-dip Nitrile is bonded through a tumbling thermal process that cures the rubber into the HPPE liner. This means the glove resists swelling and softening when exposed to the hydraulic fluids and harsh solvents commonly found in glass edging and metal stamping lines.

Bare-Hand Dexterity with Armored Backing
Forget the stiff, claw-like feel of split-leather work gloves. At 15-gauge seamless knit, this glove moves with the intricate movements of your knuckles. Install tiny screws, sort precise timber, or measure thin glass sheets without taking your gloves off. The dust-free back wicks heat away, keeping production crews compliant even on 12-hour shifts.

Specifications:

  • Shell Material: HPPE, Steel Fiber, Polyester Composite

  • Coating: Black/Gray Sandy Nitrile (Double-Dipped Palm & Fingers)

  • Cut Level: ANSI/ISEA 105-2016 Level A5 (EN388:2016 Level C equivalent)

  • Gauge: 15-Gauge Seamless Knit

  • Cuff Style: Elastic Knit Wrist (prevents debris ingress)

  • Properties: Liquid-Proof Palm, Anti-Static, Abrasion Resistant

Weight 41.27 lbs
Dimensions 20.87 × 18.11 × 13.78 in
Usage scenarios

Machinery manufacturing, industrial parks, steel smelting
Cut resistance level

leve 5
Material

Cut-resistant yarn
MOQ

200
Sample lead time

3-10 days (in stock), 7-18 days (customized)
production cycle

18-40 days after sample approval
Sample

Samples are free; you only need to pay a small shipping fee

Reviews

There are no reviews yet.

Be the first to review “ANSI A5 Cut Resistant Gloves, Double Coated Nitrile Micro-Foam, Oil & Water Proof Grip, Carpentry & Wood Carving”

Your email address will not be published. Required fields are marked *

Related products